Birla Cabins

Additional Information:

• Delivery Time: 4 Days

Our customers can avail from us a wide range of superior quality Portable Steel Toilet. These toilets are designed as per the requirements of our clients using high-grade raw material and sophisticated machines. Moreover, these toilets are tested on various parameters so as to ensure their adherence to international standards and norms. Our offered portable toilets are known for their strong construction and impact resistance.

Features

Vibrant

Hygienic

Safe

Weather resistance

Paint

Epoxy Zinc Phosphate primer and synthetic Epoxy paints used for final 2 coats (Corrosion free and fire proof paints)

Insulation

25 mm thick Glass wool insulation used for walls as well as 50 mm thick Glass wool insulation provided for roof.

Inner Panelling

Aesthetically finished Interiors that provide custom built appearance with high quality workmanship

All vertical & horizontal corners neatly and smoothly finished with Aluminium section

Panelling of side walls & roof is of 9 mm thick decorative laminated MDF board

Main Entry Door

The door interiors finished with same material matching with that of bunk house interior

Doors provided with locking arrangement with separate handles of both sides of door as required

Aluminium Windows

Aluminium sliding type powder coated windows that are made of aluminium section which is 4 mm thick tinted glass.

Electrical System

Bunk houses provided with concealed electrical copper cables & wiring suitable for 250 volt, 50 HZ single phase AC power supply

Copper cables used are of 3/19 cable for lighting circuit

ISI mark & concealed PVC conduits insulated copper wire used for wiring in PVC conduit with small size distribution board with MCB protection and to separate with main supply

Base Frame

Base frame used are of pressed mild steel channel section

Main structural element are of 'C' Channels 100 mm x 50 mm and cross member is of 'C' channels section size 75 mm x 40 mm

Side and End Walls

Side & end frames made out of pressed sections of suitable profiles/pillars of sufficient strength

9 mm MDF board used for interior wall

All steel sheets used are treated for corrosion resistance

Vertically corrugated Sheet Panels that are continuously welded to top side and base structures to offer better strength to weight ratio

All gaps sealed at edges & at seams, bottom etc for preventing ingress of moisture

Flooring Systems

Bottom frame provided of 18 mm thick plywood, bison panel/E board (fixed by means of self taping screws)

PVC vinyl flooring fixed on panel

Roof

Interior panelling is done in 9 mm MDF board with adequate insulation

Our customers can avail from us a wide range of superior quality Portable Steel Toilet. These toilets are designed as per the requirements of our clients using high-grade raw material and sophisticated machines. Moreover, these toilets are tested on various parameters so as to ensure their adherence to international standards and norms. Our offered portable toilets are known for their strong construction and impact resistance.

Features

Vibrant

Hygienic

Safe

Weather resistance

Paint

Epoxy Zinc Phosphate primer and synthetic Epoxy paints used for final 2 coats (Corrosion free and fire proof paints)

Insulation

25 mm thick Glass wool insulation used for walls as well as 50 mm thick Glass wool insulation provided for roof.

Inner Panelling

Aesthetically finished Interiors that provide custom built appearance with high quality workmanship

All vertical & horizontal corners neatly and smoothly finished with Aluminium section

Panelling of side walls & roof is of 9 mm thick decorative laminated MDF board

Main Entry Door

The door interiors finished with same material matching with that of bunk house interior

Doors provided with locking arrangement with separate handles of both sides of door as required

Aluminium Windows

Aluminium sliding type powder coated windows that are made of aluminium section which is 4 mm thick tinted glass.

Electrical System

Bunk houses provided with concealed electrical copper cables & wiring suitable for 250 volt, 50 HZ single phase AC power supply

Copper cables used are of 3/19 cable for lighting circuit

ISI mark & concealed PVC conduits insulated copper wire used for wiring in PVC conduit with small size distribution board with MCB protection and to separate with main supply

Base Frame

Base frame used are of pressed mild steel channel section

Main structural element are of 'C' Channels 100 mm x 50 mm and cross member is of 'C' channels section size 75 mm x 40 mm

Side and End Walls

Side & end frames made out of pressed sections of suitable profiles/pillars of sufficient strength

9 mm MDF board used for interior wall

All steel sheets used are treated for corrosion resistance

Vertically corrugated Sheet Panels that are continuously welded to top side and base structures to offer better strength to weight ratio

All gaps sealed at edges & at seams, bottom etc for preventing ingress of moisture

Flooring Systems

Bottom frame provided of 18 mm thick plywood, bison panel/E board (fixed by means of self taping screws)

PVC vinyl flooring fixed on panel

Roof

Interior panelling is done in 9 mm MDF board with adequate insulation

Additional Information:

• Delivery Time: 5 Days